Would you like to find out how to put a slider on a zipper? Here are the two easiest ways I use to install a zipper slider and pull on zippers by the yard. One is using a simple household item as a super effective tool, and I also show another way to insert a zipper slider using no tools at all. So how do you install a slider? See and let me know which of the two easy ways you like most!
Remember this detailed zipper sewing guide for beginners? I had been working on it for a long time, firmly decided that I'm gonna make it SUPER easy for you to find out all you need to know about zippers... Well, it turned out great, and you love it! It has basically everything you need to know about how to sew with zippers. Except for one super important thing. One you definitely NEED to know to even start sewing zippers, haha - how did it slip out of my mind! So today I'm adding that missing how-to: adding sliders to the zipper tape. The FIRST thing to know about zippers - but it's easy!
Find out everything I know about sewing with zippers! Check out my master post on sewing zippers.
Before I start with zipper sliders, let me quickly explain that thing about zippers by the yard:
What are zippers by the yard or zips on a roll - or continuous zipper tape?
Standard, ready-made zippers are cut to match a certain standard length (6", 7", 8" etc). But you can also purchase long zipper tape with the zipper chain in the center, without the stoppers. It enables you to make zippers of any length with little waste, saving money and time. You can decide on how many yards to buy in a single piece, hence the name. You'll need to buy zipper sliders separately, but often at the same vendor.
With zippers by the yard, you can make your zippers any length you need, any time! Make sure to save these tutorials and pouch patterns - they are perfect to use with zippers by the yard:
- this popular boxed zipper pouch pattern
- the Aiden cell phone bag pattern, or check out
- bags and purses patterns in my shop
Where to get zippers by the yard?
Here is a list I made for where to buy zippers - mostly zippers by the yard. These are usually also the places where to buy zipper sliders and zipper pulls.
It's good to buy zipper tape and zipper sliders at the same place. Especially when you're starting out, to make sure the sizes match. This is a little portion of my own stash of zippers by the yard:
When you get zippers by the yard, the zipper slider and pull are not attached yet. You need to do that yourself. But it's easy and quick.
I'll show you how to put a slider on a zipper - here are my two favorite and easy ways for how to put a zipper pull on the tape.
How To Put a Slider On a Zipper Tutorial
This, first tutorial uses a simple household item you've already got - a fork. Let's go!
First, cut the length of your continuous zipper tape to the length required for your project. It's always better to cut it an inch longer than you need. Get a zipper slider ready - make sure it's the right size.
Step 1 - Open One End Of The Zipper Tape
Open the end of the zipper tape by gently pulling the zipper teeth apart. For me, it's easiest to work with the zipper tape when I open approximately 5-inch of the zipper tape length.
Step 2 - Slide the Zipper Head On the Fork
Take the zipper head and flip it over, so the front side with the puller is facing away from you. Also, the top part (with two holes) is at the top of the fork, and the narrow, straight-edge one-hole part is down.
Now, slide the zipper head (slider) onto the fork, with the front side of the zipper slider facing down.
NOTE: just the zipper pull will be caught by the fork, the fork will NOT go through the actual hole in the slider. See here:
Also, have something heavy to hold the fork in place. I placed a hammer head on the other end of the fork. Anything that's heavy and not too bulky will do.
Step 3 - Pull Zipper Tape Ends Into The Zipper Slider
Turn the zipper tape face down. This means that the zipper teeth will face the table, you will only see the back of the zipper tape.
Holding your two zip tape 'tails' at an angle (forming a V, see the gif below), slowly feed them into the two openings at the top of the zipper slider. Both at the same time.
Gently pull, wiggle a bit if needed, until they both come through and out at bottom (straight) end of the zipper slider.
Pull a bit more so you have the zipper slider at least an inch into the zipper tape, then remove the fork and slide the zipper head more towards the middle of your zipper tape. It's done its job, perfectly:
Method 2 - How do you install a zipper slider without any tools?
Now, sometimes you might want to forego any tools, be it even so simple and everyday like a fork. And yes, I've been using this second way to put on zipper heads for years! Still do sometimes.
All you need to do is take a look at your zipper tape, pull the tail gently apart, and snip off just a few millimeters from one tail. That would be like 3-5 tiny plastic coil bits. One side only!
Let me show you in step by step photos to make it super easy for you:
I pulled the tape a bit apart and cut off 4 nylon coil bits on one side of the tape only. Now slide the rouded end of the zipper slider on the longer zipper tape tail.
You'll notice that the zipper slider has two holes at the top, one for each of the two zipper tape 'tails'. Now it's time to slowly slide the shorter tape end into the other hole on the zipper head:
Holding the tip of the tape with one hand, pull the zipper pull onto the zipper chain with the other hand.
Now you can cut off the 'tail' to straighten your zipper tape. Done!
Bonus tip: just to make sure the zipper slider does not fall off during the sewing of the bag or pouch, you'll always want to secure the zipper teeth ends by adding a few stitches:
Now it's time to go sewing this zipper into a bag (see all my bagmaking tips here!). Or better yet, neaten the ends of this zipper first, by adding zipper tabs - see here how to add zipper tabs. It's probably my best-ever zipper sewing tip!
WANT MORE FREE TUTORIALS AND GOODIES?
Get email updates and never miss out on new patterns, printables, and tutorials:
Or …check out the popular Aiden Cell Phone Purse in our shop. Guess what's on the back of this cool phone bag!